Dive Into Halloween with a Dianoga-It-Yourself Pumpkin

  • by

Turn a pumpkin into trash — a trash compactor, that is! Grab your recyclables and old cardboard boxes and broken plastic toys. (New plastic toys from the dollar store also make great greeblies once you take them apart.) You’ll need it all to make a new Halloween home for a dianoga inside a craft pumpkin.

This creepy craft isn’t simple, but it oozes fun. Get ready to dive into making this one-of-kind Star Wars Halloween craft!

What You’ll Need

Small (6.5”) craft pumpkin
Pumpkin carving tool or knife
Black spray paint
Monster googly eye (or bright green paper and black marker)
Large wooden bead
Lightweight modeling clay
Floral foam
Black cardstock paper
Clear contact paper
Cardboard
Inexpensive or broken plastic toys
Straws
Black, brown, red, gold, and silver acrylic paint
Clear gloss varnish
Hot glue gun
Hobby clippers
Scissors
School glue
Pencil

Get Started!

Note: The activities in this article should only be done with adult supervision.

Step 1: Begin by carefully cutting off the top of the craft pumpkin around the stem.

Step 2: Spray paint the pumpkin black and let dry.

Step 3: Slide the wooden bead on the top of a straw and add glue to keep it in place.

Step 4: Remove the iris from the monster googly eye. If you don’t have a monster eye, you can cut a small circle of bright green paper and draw a slitted pupil on it.

Step 5: Glue the monster eye to the wooden bead and let dry.

Step 6: Roll a small snake of modeling clay and form an eyelid around the eye, pressing the clay against the wooden bead.

Step 7: Fill in the rest of the head and body with modeling clay. (You can use the above image for reference.) Set the dianoga aside to dry.

Step 8: Glue a large piece of floral foam in the pumpkin. Make sure it’s no taller than about half an inch under the top edge of the pumpkin. Push the pencil into the center of the foam to make a hole.

Step 9: Cut a circle out of the black cardstock paper, approximately 6” in diameter. 

Step 10: Cover the black paper circle in clear contact paper.

Step 11: Glue the black paper circle on top of the floral foam. Cut or push a hole into the center of the circle for the dianoga to fit in later.

Step 12: Cut small squares and rectangles out of the cardboard. Cut two straws in half. Glue small strips of paper around one or two straws for additional details.

Step 13: Use the hobby clippers to cut small pieces of broken or cheap plastic toys. These will make more trash for the compactor.

Step 14: Paint the cardboard, straws, and plastic pieces with the black acrylic paint. Let dry.

Step 15: Paint the pieces with gold and silver paint to make them look like metal. Drybrush black and silver paint to highlight details. Mix black acrylic paint and water; paint it on the pieces to make them look used and old.

Step 16: Next, paint the dianoga with the black acrylic paint and let dry.

Step 17: Carefully give the dianoga tentacles with the hot glue. As you remove the thin strings sticking to the hot glue gun, save them! You’ll use these for the dianoga in a few steps.

Step 18: Paint the entire dianoga with the brown paint and let dry. 

Step 19: Paint the sclera of the dianoga’s eye with the red paint. Let dry.

Step 20: Dry brush red paint on the dianoga’s body for highlights. 

Step 21: Use the same black paint and water mix you made earlier to add more details to the dianoga and let dry.

Step 22: Glue the hot glue strings on the top of the dianoga’s head to make its hair.

Step 23: Gently push the dianoga into the hole in the center of the pumpkin. You may need to trim the straw to get it the right height.

Step 24: Paint the dianoga with the clear gloss varnish for a shiny wet look. Let any droplets of varnish form on the tentacles to complete the wet look. Let dry.

Step 25: Glue the trash pieces around the dianoga. 

Your garbage masher pumpkin is complete! Display it on a table or shelf for a scary surprise this Halloween. 

Epic Stories. Tons of TV. Live Sports.

Kelly Knox writes features and DIYs for StarWars.com. Her work can also be seen on DC Comics, IGN, and more. Follow her on Twitter at @kelly_knox to talk Star Wars, games, and crafts.

StarWars.com. All Star Wars, all the time.

Site tags: #StarWarsBlog, #Halloween

Leave a Reply

Your email address will not be published. Required fields are marked *